openal-soft-1.22.2: Fixed PipeWire version check. Fixed building with PipeWire versions before 0.3.33. openal-soft-1.22.1: Fixed CoreAudio capture. Fixed air absorption strength. Fixed handling 5.1 devices on Windows that use Rear channels instead of Side channels. Fixed some compilation issues on MinGW. Fixed ALSA not being used on some systems without PipeWire and PulseAudio. Fixed OpenSL capturing noise. Fixed Oboe capture failing with some buffer sizes. Added checks for the runtime PipeWire version. The same or newer version than is used for building will be needed at runtime for the backend to work. Separated 3D7.1 into its own speaker configuration. openal-soft-1.22.0: Implemented the ALC_SOFT_reopen_device extension. This allows for moving devices to different outputs without losing object state. Implemented the ALC_SOFT_output_mode extension. Implemented the AL_SOFT_callback_buffer extension. Implemented the AL_SOFT_UHJ extension. This supports native UHJ buffer formats and Super Stereo processing. Implemented the legacy EAX extensions. Enabled by default only on Windows. Improved sound positioning stability when a source is near the listener. Improved the default 5.1 output decoder. Improved the high frequency response for the HRTF second-order ambisonic decoder. Improved SoundIO capture behavior. Fixed UHJ output on NEON-capable CPUs. Fixed redundant effect updates when setting an effect property to the current value. Fixed WASAPI capture using really low sample rates, and sources with very high pitch shifts when using a bsinc resampler. Added a PipeWire backend. Added enumeration for the JACK and CoreAudio backends. Added optional support for RTKit to get real-time priority. Only used as a backup when pthread_setschedparam fails. Added an option for JACK playback to render directly in the real-time processing callback. For lower playback latency, on by default. Added an option for custom JACK devices. Added utilities to encode and decode UHJ audio files. Files are decoded to the .amb format, and are encoded from libsndfile-compatible formats. Added an in-progress extension to hold sources in a playing state when a device disconnects. Allows devices to be reset or reopened and have sources resume from where they left off. Lowered the priority of the JACK backend. To avoid it getting picked when PipeWire is providing JACK compatibility, since the JACK backend is less robust with auto-configuration. openal-soft-1.21.1: Improved alext.h's detection of standard types. Improved slightly the local source position when the listener and source are near each other. Improved click/pop prevention for sounds that stop prematurely. Fixed compilation for Windows ARM targets with MSVC. Fixed ARM NEON detection on Windows. Fixed CoreAudio capture when the requested sample rate doesn't match the system configuration. Fixed OpenSL capture desyncing from the internal capture buffer. Fixed sources missing a batch update when applied after quickly restarting the source. Fixed missing source stop events when stopping a paused source. Added capture support to the experimental Oboe backend. openal-soft-1.21.0: Updated library codebase to C++14. Implemented the AL_SOFT_effect_target extension. Implemented the AL_SOFT_events extension. Implemented the ALC_SOFT_loopback_bformat extension. Improved memory use for mixing voices. Improved detection of NEON capabilities. Improved handling of PulseAudio devices that lack manual start control. Improved mixing performance with PulseAudio. Improved high-frequency scaling quality for the HRTF B-Format decoder. Improved makemhr's HRIR delay calculation. Improved WASAPI capture of mono formats with multichannel input. Reimplemented the modulation stage for reverb. Enabled real-time mixing priority by default, for backends that use the setting. It can still be disabled in the config file. Enabled dual-band processing for the built-in quad and 7.1 output decoders. Fixed a potential crash when deleting an effect slot immediately after the last source using it stops. Fixed building with the static runtime on MSVC. Fixed using source stereo angles outside of -pi...+pi. Fixed the buffer processed event count for sources that start with empty buffers. Fixed trying to open an unopenable WASAPI device causing all devices to stop working. Fixed stale devices when re-enumerating WASAPI devices. Fixed using unicode paths with the log file on Windows. Fixed DirectSound capture reporting bad sample counts or erroring when reading samples. Added an in-progress extension for a callback-driven buffer type. Added an in-progress extension for higher-order B-Format buffers. Added an in-progress extension for convolution reverb. Added an experimental Oboe backend for Android playback. This requires the Oboe sources at build time, so that it's built as a static library included in libopenal. Added an option for auto-connecting JACK ports. Added greater-than-stereo support to the SoundIO backend. Modified the mixer to be fully asynchronous with the external API, and should now be real-time safe. Although alcRenderSamplesSOFT is not due to locking to check the device handle validity. Modified the UHJ encoder to use an all-pass FIR filter that's less harmful to non-filtered signal phase. Converted examples from SDL_sound to libsndfile. To avoid issues when combining SDL2 and SDL_sound. Worked around a 32-bit GCC/MinGW bug with TLS destructors. See: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83562 Reduced the maximum number of source sends from 16 to 6. Removed the QSA backend. It's been broken for who knows how long. Got rid of the compile-time native-tools targets, using cmake and global initialization instead. This should make cross-compiling less troublesome. openal-soft-1.20.1: Implemented the AL_SOFT_direct_channels_remix extension. This extends AL_DIRECT_CHANNELS_SOFT to optionally remix input channels that don't have a matching output channel. Implemented the AL_SOFT_bformat_ex extension. This extends B-Format buffer support for N3D or SN3D scaling, or ACN channel ordering. Fixed a potential voice leak when a source is started and stopped or restarted in quick succession. Fixed a potential device reset failure with JACK. Improved handling of unsupported channel configurations with WASAPI. Such setups will now try to output at least a stereo mix. Improved clarity a bit for the HRTF second-order ambisonic decoder. Improved detection of compatible layouts for SOFA files in makemhr and sofa-info. Added the ability to resample HRTFs on load. MHR files no longer need to match the device sample rate to be usable. Added an option to limit the HRTF's filter length. openal-soft-1.20.0: Converted the library codebase to C++11. A lot of hacks and custom structures have been replaced with standard or cleaner implementations. Partially implemented the Vocal Morpher effect. Fixed the bsinc SSE resamplers on non-GCC compilers. Fixed OpenSL capture. Fixed support for extended capture formats with OpenSL. Fixed handling of WASAPI not reporting a default device. Fixed performance problems relating to semaphores on macOS. Modified the bsinc12 resampler's transition band to better avoid aliasing noise. Modified alcResetDeviceSOFT to attempt recovery of disconnected devices. Modified the virtual speaker layout for HRTF B-Format decoding. Modified the PulseAudio backend to use a custom processing loop. Renamed the makehrtf utility to makemhr. Improved the efficiency of the bsinc resamplers when up-sampling. Improved the quality of the bsinc resamplers slightly. Improved the efficiency of the HRTF filters. Improved the HRTF B-Format decoder coefficient generation. Improved reverb feedback fading to be more consistent with pan fading. Improved handling of sources that end prematurely, avoiding loud clicks. Improved the performance of some reverb processing loops. Added fast_bsinc12 and 24 resamplers that improve efficiency at the cost of some quality. Notably, down-sampling has less smooth pitch ramping. Added support for SOFA input files with makemhr. Added a build option to use pre-built native tools. For cross-compiling, use with caution and ensure the native tools' binaries are kept up-to-date. Added an adjust-latency config option for the PulseAudio backend. Added basic support for multi-field HRTFs. Added an option for mixing first- or second-order B-Format with HRTF output. This can improve HRTF performance given a number of sources. Added an RC file for proper DLL version information. Disabled some old KDE workarounds by default. Specifically, PulseAudio streams can now be moved (KDE may try to move them after opening). openal-soft-1.19.1: Implemented capture support for the SoundIO backend. Fixed source buffer queues potentially not playing properly when a queue entry completes. Fixed possible unexpected failures when generating auxiliary effect slots. Fixed a crash with certain reverb or device settings. Fixed OpenSL capture. Improved output limiter response, better ensuring the sample amplitude is clamped for output. openal-soft-1.19.0: Implemented the ALC_SOFT_device_clock extension. Implemented the Pitch Shifter, Frequency Shifter, and Autowah effects. Fixed compiling on FreeBSD systems that use freebsd-lib 9.1. Fixed compiling on NetBSD. Fixed the reverb effect's density scale and panning parameters. Fixed use of the WASAPI backend with certain games, which caused odd COM initialization errors. Increased the number of virtual channels for decoding Ambisonics to HRTF output. Changed 32-bit x86 builds to use SSE2 math by default for performance. Build-time options are available to use just SSE1 or x87 instead. Replaced the 4-point Sinc resampler with a more efficient cubic resampler. Renamed the MMDevAPI backend to WASAPI. Added support for 24-bit, dual-ear HRTF data sets. The built-in data set has been updated to 24-bit. Added a 24- to 48-point band-limited Sinc resampler. Added an SDL2 playback backend. Disabled by default to avoid a dependency on SDL2. Improved the performance and quality of the Chorus and Flanger effects. Improved the efficiency of the band-limited Sinc resampler. Improved the Sinc resampler's transition band to avoid over-attenuating higher frequencies. Improved the performance of some filter operations. Improved the efficiency of object ID lookups. Improved the efficienty of internal voice/source synchronization. Improved AL call error logging with contextualized messages. Removed the reverb effect's modulation stage. Due to the lack of reference for its intended behavior and strength. openal-soft-1.18.2: Fixed resetting the FPU rounding mode after certain function calls on Windows. Fixed use of SSE intrinsics when building with Clang on Windows. Fixed a crash with the JACK backend when using JACK1. Fixed use of pthread_setnane_np on NetBSD. Fixed building on FreeBSD with an older freebsd-lib. OSS now links with libossaudio if found at build time (for NetBSD). openal-soft-1.18.1: Fixed an issue where resuming a source might not restart playing it. Fixed PulseAudio playback when the configured stream length is much less than the requested length. Fixed MMDevAPI capture with sample rates not matching the backing device. Fixed int32 output for the Wave Writer. Fixed enumeration of OSS devices that are missing device files. Added correct retrieval of the executable's path on FreeBSD. Added a config option to specify the dithering depth. Added a 5.1 decoder preset that excludes front-center output. openal-soft-1.18.0: Implemented the AL_EXT_STEREO_ANGLES and AL_EXT_SOURCE_RADIUS extensions. Implemented the AL_SOFT_gain_clamp_ex, AL_SOFT_source_resampler, AL_SOFT_source_spatialize, and ALC_SOFT_output_limiter extensions. Implemented 3D processing for some effects. Currently implemented for Reverb, Compressor, Equalizer, and Ring Modulator. Implemented 2-channel UHJ output encoding. This needs to be enabled with a config option to be used. Implemented dual-band processing for high-quality ambisonic decoding. Implemented distance-compensation for surround sound output. Implemented near-field emulation and compensation with ambisonic rendering. Currently only applies when using the high-quality ambisonic decoder or ambisonic output, with appropriate config options. Implemented an output limiter to reduce the amount of distortion from clipping. Implemented dithering for 8-bit and 16-bit output. Implemented a config option to select a preferred HRTF. Implemented a run-time check for NEON extensions using /proc/cpuinfo. Implemented experimental capture support for the OpenSL backend. Fixed building on compilers with NEON support but don't default to having NEON enabled. Fixed support for JACK on Windows. Fixed starting a source while alcSuspendContext is in effect. Fixed detection of headsets as headphones, with MMDevAPI. Added support for AmbDec config files, for custom ambisonic decoder configurations. Version 3 files only. Added backend-specific options to alsoft-config. Added first-, second-, and third-order ambisonic output formats. Currently only works with backends that don't rely on channel labels, like JACK, ALSA, and OSS. Added a build option to embed the default HRTFs into the lib. Added AmbDec presets to enable high-quality ambisonic decoding. Added an AmbDec preset for 3D7.1 speaker setups. Added documentation regarding Ambisonics, 3D7.1, AmbDec config files, and the provided ambdec presets. Added the ability for MMDevAPI to open devices given a Device ID or GUID string. Added an option to the example apps to open a specific device. Increased the maximum auxiliary send limit to 16 (up from 4). Requires requesting them with the ALC_MAX_AUXILIARY_SENDS context creation attribute. Increased the default auxiliary effect slot count to 64 (up from 4). Reduced the default period count to 3 (down from 4). Slightly improved automatic naming for enumerated HRTFs. Improved B-Format decoding with HRTF output. Improved internal property handling for better batching behavior. Improved performance of certain filter uses. Removed support for the AL_SOFT_buffer_samples and AL_SOFT_buffer_sub_data extensions. Due to conflicts with AL_EXT_SOURCE_RADIUS. openal-soft-1.17.2: Implemented device enumeration for OSSv4. Fixed building on OSX. Fixed building on non-Windows systems without POSIX-2008. Fixed Dedicated Dialog and Dedicated LFE effect output. Added a build option to override the share install dir. Added a build option to static-link libgcc for MinGW. openal-soft-1.17.1: Fixed building with JACK and without PulseAudio. Fixed building on FreeBSD. Fixed the ALSA backend's allow-resampler option. Fixed handling of inexact ALSA period counts. Altered device naming scheme on Windows backends to better match other drivers. Updated the CoreAudio backend to use the AudioComponent API. This clears up deprecation warnings for OSX 10.11, although requires OSX 10.6 or newer. openal-soft-1.17.0: Implemented a JACK playback backend. Implemented the AL_EXT_BFORMAT and AL_EXT_MULAW_BFORMAT extensions. Implemented the ALC_SOFT_HRTF extension. Implemented C, SSE3, and SSE4.1 based 4- and 8-point Sinc resamplers. Implemented a C and SSE based band-limited Sinc resampler. This does 12- to 24-point Sinc resampling, and performs anti-aliasing. Implemented B-Format output support for the wave file writer. This creates FuMa-style first-order Ambisonics wave files (AMB format). Implemented a stereo-mode config option for treating stereo modes as either speakers or headphones. Implemented per-device configuration options. Fixed handling of PulseAudio and MMDevAPI devices that have identical descriptions. Fixed a potential lockup when stopping playback of suspended PulseAudio devices. Fixed logging of Unicode characters on Windows. Fixed 5.1 surround sound channels. By default it will now use the side channels for the surround output. A configuration using rear channels is still available. Fixed the QSA backend potentially altering the capture format. Fixed detecting MMDevAPI's default device. Fixed returning the default capture device name. Fixed mixing property calculations when deferring context updates. Altered the behavior of alcSuspendContext and alcProcessContext to better match certain Windows drivers. Altered the panning algorithm, utilizing Ambisonics for better side and back positioning cues with surround sound output. Improved support for certain older Windows apps. Improved the alffplay example to support surround sound streams. Improved support for building as a sub-project. Added an HRTF playback example. Added a tone generator output test. Added a toolchain to help with cross-compiling to Android. openal-soft-1.16.0: Implemented EFX Chorus, Flanger, Distortion, Equalizer, and Compressor effects. Implemented high-pass and band-pass EFX filters. Implemented the high-pass filter for the EAXReverb effect. Implemented SSE2 and SSE4.1 linear resamplers. Implemented Neon-enhanced non-HRTF mixers. Implemented a QSA backend, for QNX. Implemented the ALC_SOFT_pause_device, AL_SOFT_deferred_updates, AL_SOFT_block_alignment, AL_SOFT_MSADPCM, and AL_SOFT_source_length extensions. Fixed resetting mmdevapi backend devices. Fixed clamping when converting 32-bit float samples to integer. Fixed modulation range in the Modulator effect. Several fixes for the OpenSL playback backend. Fixed device specifier names that have Unicode characters on Windows. Added support for filenames and paths with Unicode (UTF-8) characters on Windows. Added support for alsoft.conf config files found in XDG Base Directory Specification locations (XDG_CONFIG_DIRS and XDG_CONFIG_HOME, or their defaults) on non-Windows systems. Added a GUI configuration utility (requires Qt 4.8). Added support for environment variable expansion in config options (not keys or section names). Added an example that uses SDL2 and ffmpeg. Modified examples to use SDL_sound. Modified CMake config option names for better sorting. HRTF data sets specified in the hrtf_tables config option may now be relative or absolute filenames. Made the default HRTF data set an external file, and added a data set for 48khz playback in addition to 44.1khz. Added support for C11 atomic methods. Improved support for some non-GNU build systems. openal-soft-1.15.1: Fixed a regression with retrieving the source's AL_GAIN property. openal-soft-1.15: Fixed device enumeration with the OSS backend. Reorganized internal mixing logic, so unneeded steps can potentially be skipped for better performance. Removed the lookup table for calculating the mixing pans. The panning is now calculated directly for better precision. Improved the panning of stereo source channels when using stereo output. Improved source filter quality on send paths. Added a config option to allow PulseAudio to move streams between devices. The PulseAudio backend will now attempt to spawn a server by default. Added a workaround for a DirectSound bug relating to float32 output. Added SSE-based mixers, for HRTF and non-HRTF mixing. Added support for the new AL_SOFT_source_latency extension. Improved ALSA capture by avoiding an extra buffer when using sizes supported by the underlying device. Improved the makehrtf utility to support new options and input formats. Modified the CFLAGS declared in the pkg-config file so the "AL/" portion of the header includes can optionally be omitted. Added a couple example code programs to show how to apply reverb, and retrieve latency. The configuration sample is now installed into the share/openal/ directory instead of /etc/openal. The configuration sample now gets installed by default.